Lighting Control

Introduction Madrix is a powerful lighting control software used for creating dynamic and professional light shows with LED installations. By pairing Pixel LED Animator with Madrix, you can craft visually stunning pixel LED effects and display them with precise control and synchronization. This tutorial will guide you through integrating Pixel LED Animator with Madrix to enhance your LED performances. Step 1: Set Up Madrix Software Begin by downloading and installing Madrix from the official Madrix website. Madrix supports various protocols like DMX, Art-Net, and SPI for controlling LED systems. Launch Madrix and configure the Output settings to match your LED hardware. Ensure that the correct protocol (e.g., DMX, Art-Net) is selected based on your setup. Verify that Madrix is communicating correctly with your LED panels by performing a test run. You should see the panels respond to commands from Madrix. Step 2: Create Animations in Pixel LED Animator Open Pixel LED Animator, a tool designed for generating pixel-based LED animations, including text effects, images, and dynamic patterns. Design your custom pixel animations by adjusting colors, transitions, and timing to match your desired effects. Pixel LED Animator allows you to create detailed effects suitable for large installations. Once your animation is complete, export it as an AVI video file. This is a compatible format for importing into Madrix, enabling you to display the animation on your LED setup. Step 3: Import AVI Files into Madrix Open Madrix and navigate to the Media tab. Click on Import Media and browse for the AVI file exported from Pixel LED Animator. Once imported, the animation will appear in the Media section, ready to be applied to your LED output. Step 4: Configure Playback Settings After importing your animation, drag and drop it onto the Timeline within Madrix. Madrix allows fine-tuning of playback settings such as speed, looping, and brightness. Use Madrix’s built-in controls to adjust the playback to match your show’s requirements. You can also adjust the video’s timing to ensure synchronization with other elements of your performance. Test the playback on your LED panels to ensure the animation runs smoothly and in sync with your other light elements. Step 5: Synchronize and Test Before going live, perform a thorough test to ensure synchronization: ...

Introduction Resolume is a popular software suite used by VJs, lighting designers, and performance artists to create stunning visuals and control lighting setups. By combining Pixel LED Animator with Resolume, you can design dynamic pixel LED animations and synchronize them with Resolume’s advanced video and lighting control features. This tutorial will guide you through the process of using Pixel LED Animator with Resolume for top-quality lighting displays. Step 1: Set Up Resolume Arena or Avenue Download and install Resolume Arena or Avenue from the official Resolume website. Open Resolume and configure your display setup. Navigate to the Preferences section and set up the output to match your LED hardware specifications. Ensure that the video output settings in Resolume are configured to work with your LED panels, and test the signal to make sure everything is connected correctly. Step 2: Create Animations in Pixel LED Animator Open Pixel LED Animator and design your custom LED animation. Customize the colors, timing, and pixel effects to create vibrant and dynamic visuals. Once the animation is complete, export it as an AVI video sequence. Step 3: Import AVI Files into Resolume Launch Resolume and go to the Deck tab. Import your AVI video sequence into the Deck by clicking on the Add Clip button and selecting your exported video from Pixel LED Animator. The video will now appear in the clip list. You can drag and drop it onto the composition layer for display. Step 4: Synchronize and Control Playback Once the AVI video is imported, you can adjust its settings in the Clip Properties panel. Modify playback options such as speed, brightness, and looping to match your desired effect. Use Resolume’s timecode feature to sync the video with your live show or other video sequences. Preview the animation to ensure it is properly synchronized with your LED panels and that the timing aligns with your show. Step 5: Fine-Tune the Show Before you go live with your show, it’s important to test and fine-tune the settings: ...

Introduction xLights is an advanced software suite used for creating intricate lighting displays, offering comprehensive control over LED setups, including pixel-based lighting systems. By combining Pixel LED Animator with xLights, you can create mesmerizing pixel animations and seamlessly synchronize them for professional-quality shows. This tutorial will guide you through the process of using these two tools together. Step 1: Set Up xLights Software Download and install the latest version of xLights from the official xLights website. Launch xLights and go to the Setup menu. Configure your lighting setup by adding your controllers, mapping out your pixel displays, and ensuring everything is properly connected. Verify that your lighting controllers are properly configured to communicate with your LED hardware. Step 2: Create Animations in Pixel LED Animator Open Pixel LED Animator and design your custom pixel LED effects. Adjust elements like color transitions, timing, and pixel arrangements to create unique lighting effects that suit your show. Once your animations are complete, export them as AVI video files. This format is supported by xLights for easy integration. Step 3: Import AVI Files into xLights Open xLights and navigate to the Sequence tab. In the Sequence Editor, go to the Add Media section and select the Video option. Browse to the location of the AVI file you exported from Pixel LED Animator and import it into your xLights sequence. The video will appear in the timeline where you can align it with your lighting controls. Step 4: Synchronize and Control Playback Drag the imported video to the desired position on the timeline. Adjust the playback settings such as speed, brightness, and looping. Ensure that the timing of your video matches your LED setup’s synchronization. Test the playback to confirm that everything is aligned and that your LED display is synchronized with the video. Step 5: Finalizing the Show Before going live, ensure that everything is functioning as expected: ...